How do I connect the SAMi3 app to the SAMi-3 camera?

Connect your camera to your WiFi router with an Ethernet wire. Be sure you plug into a "LAN" jack, not the "WAN" jack. Note that if you are using the SAMi router, you can skip this step and connect without the Ethernet wire.
Plug in the camera power. Wait for the Power light to turn green, then red, then green again.
Using an opened paper clip, press the reset button on the side of the camera. Wait for the Power light to turn green, then red, then green again.
Start the SAMi3 app.
Select Settings, then Add SAMi-3 Network Camera. If you see "Camera Settings" instead, select this then scroll to the bottom and select Remove Camera. The Add Camera option will then appear.
The camera should then be discovered and you will be stepped through the setup process.

Search